This C-module integrates a fixed lens module and an A-25H0 Variable Focus Lens in an M12 receptacle (S-mount). The module is built-in with an FPC cable, and can be connected to a standard 1 mm pitch FPC connector. It can therefore be very easily integrated in a standard M12 sensor board. The module is compatible with most imaging sensor formats, up to 1/2.4’’ diagonal. This module can be driven by the same drivers as the A-25H0 lens.
Short mechanical backfocal (MBFL) not compatible with all sensors. Please review associated documentation.
Click here to contact a member of our sales or product team
|TYPICAL PERFORMANCE AT 25°C|
|Effective Focal Length||4.7 mm|
|Focus Range||7 cm to infinity|
|Image Circle Diameter||7.4 mm|
- M12x0.5 thread
- Flex Cable compatible with FCI connector SFW4S-2ST_E9LF
- Built-in AutoFocus actuator from 7 cm to infinity
- Optional built-in IR filter (part number: C-S-25H0-047-XXI)
- C-S-25H0-047-03: bent flex cable (FPC-A-3) without IR-cut filter.
- C-S-25H0-047-03I: bent flex cable (FPC-A-3) with IR-cut filter.
- C-S-25H0-047-07: straight flex cable (FPC-A-7) without IR-cut filter.
- C-S-25H0-047-07I: straight flex cable (FPC-A-7) with IR-cut filter.
For more detailed information on optical, mechanical, electrical performance and design, please contact us.