Representative microplate (Corning Cat. #)	Well Volume (uL)	Well Depth (mm)	Well Diameter (top/bottom) (mm)	Plate Length (mm)	Plate Width (mm)	Plate Height (mm)	A1 Row Offset (mm)	A1 Column Offset (mm)	Well center to well center spacing (mm)	Flange or skirt height (mm)	Stack Height	Well Bottom Elevation (mm)	Well Bottom Thickness (mm)	Well Bottom Area (cm2)	Distance to bottom of plate	Distance from lid to bottom of plate	Fill Depth from Filler Port
24 Well HTS Transwell Microplates
	3378, 3379, 3395, 3396, 3397, 3398,3399	1900			127.89	85.6	27.18
96 Well HTS Transwell Filter Plate
	3374, 3380, 3381,  3384, 3385, 3386, 3387, 3388, 3391, 3392	360	11.811	4.893/4.267	123.748	81.458	13.335	9.23	12.438	9	7.874		4.191	0.01	117.46	13.335
96 Well HTS Transwell Filter Plate and Receiver Plate
		360	11.811c	4.893/4.267	127.762	85.471	16.002	11.237	14.381	9	6.096	17.081	4.191	0.01	117.46	14.224	19.304	13.106
96 Well HTS Transwell Filter Plate and Reservoir Plate
					127.762	85.471	16.002	11.237	14.381	9	6.096	17.081	4.191	0.01	117.46	14.224	19.304	13.106
96 Well HTS Receiver Plate
	3382, 3583	360	11.328	10.168	127.762	85.471	14.224	12.004	13.614	8.999	6.096	14.224		1.016		14.224	16.193
96 Well HTS  Reservoir Plate
	3383	N/A	N/A	N/A	127.762	85.471	14.224			8.999	6.096	14.224		1.143		14.224	16.193
A1 Row Offset (mm) = Distance from top of plate to center of A1 well; A1 Column Offset (mm) = Distance from left edge of plate to center of A1 well
For Receiver plate you must add 13.335mm for each additional plate stack height
For Resevoir plate you must add 13.081mm for each additional plate stack height