Plate Labelers - Compatible Corning Products 96 Well Plates 384 Well Plates 1536 Well Plates Polypropylene Plates
Company Name Product Name 96 well flat bottom     96 well round bottom   96 well V bottom 96 well Easy-Wash bottom 96 well half area flat bottom 96 well clear flat bottom 96 well half area clear flat bottom 96 well special optics 384 well flat bottom 384 well low volume round bottom  384 well w/clear bottom 384 well optical imaging 384 well low volume clear flat bottom 1536 10uL 1536 well black clear bottom 1536 well flat bottom 1536 2uL "wafer"  96 well flat bottom PP 96 well round bottom PP 96 well V bottom PP Clear Pro Round PP 96 .5 mL V Block PP 96 well 1 mL round bottom block PP 96 well 2mL Block PP 384 well Plate PP 384 well low volume round bottom PP 384 well round block
Cartesian Technologies PEGASYS™ 110 X     X   X X X X X X X X X X X         X X X X              
Computype LAP-4100 Bar Code Print & Apply System  X     X   X X X X X X X X X X X         X X X X X X X        
Computype LAP-4500                          See LAP-4500 Compatibility Chart  
Tomtec Quadra Labeler X     X   X X X X X X X X X X X X X X   X X X X X X X X X X  
California Advanced Labeling, Inc. TubeWriter Direct Printer for Labware X     X   X X X X X X X X X X X X X X   X X X X X X X X X X
Velocity 11 VCode Bar Code Print and Apply Station X     X   X X X X X X X X X X X X X X   X X X X X X X X X X
Corning Cryogenic Vial Compatibility Status of LAP-4500 Specifications: 
                      TubeWriter Computype LAP4500 Printer-Applicator System
Corning Catalog Number Capacity Description Cap Type Length Diameter Taper   Custom Rollers Curved In-Feed Ramp All (17) of these vials can be labeled in the LAP-4500 with "Customized Rollers", (5) also require the "Curved in-Feed Ramp".  
2012 1.2ml Conical Freestanding Internal Thread 1.66" .50" to .43" X X   * 0.50 – 1.0” diameter;
2028 2.0ml Round Freestanding Internal Thread 1.88" .50" to .45" X X   * 0.40” diameter available with customized rollers and a changeover kit;
430487 1.2ml Conical Freestanding Internal Thread 1.70" .50" to .45" X X   * 3/8” diameter with cap is also possible with customized single-use in-feed. 
430488 2.0ml Round Freestanding Internal Thread 1.92" .50" to ..46" X X   The "Customized Rollers" 
430490 4.0ml Round Bottom Internal Thread 2.72" .50" to .46" X X  
430491 4.0ml Round Freestanding Internal Thread 2.78" .50" to .46" X X   * Are a modification to the two idler rollers in the system, and will be custom-machined with high and low areas to accommodate small  or irregular tube sizes.
430492 5.0ml Round Bottom Internal Thread 3.54" .50" to .42" X X  
430663 5.0ml Round Freestanding External Thread (.55" Cap Dia.) 3.57" .48" to .46" X X X * They provide quick change-out of the system (should be less than one minute) and are being quoted at $500. 
430662 4.0ml Round Freestanding External Thread (.55" Cap Dia) 3.01" .48" to .46" X X X * The "Curved In-Feed Ramp"
430659 2.0ml Round Freestanding External Thread (.55" Cap Dia) 1.90" .48" to .46" X X X
430658 1.2ml Conical Freestanding External Thread (.55" Cap Dia) 1.62" .48" to .45" X X X * Will be used for tapered tubes like the 3/8" centrifuge, will hold approximately 20 small diameter tubes.
430661 2.0ml Round Bottom External Thread (.55" Cap Dia) 1.85" .48" to .46" X X X * This should also be a quick change-out, consisting of a couple of wing nuts. 
430289 2.0ml Round Bottom External Thread, Plug Seal 1.68" .47" (very little taper) X X   * The entire kit (Customized Rollers + Curved In-Feed Ramp), and is customized for a specific tube.
2027 2.0ml Round Bottom Internal Thread 1.83" .49" to .46" X X  
430489 2.0ml Round Bottom Internal Thread, O-Ring 1.87" .49" to .46" X X  
2051 5.0ml Round Bottom Internal Thread 3.50" .50" to .46" X X  
430656 5.0ml Round Freestanding Internal Thread, O-Ring 3.58" .50" to .46" X X